Dyness energy storage systems B2B | Clarvento

Looking for Dyness energy storage systems at wholesale prices? Clarvento supplies Dyness solutions for residential, commercial and industrial installations, including LiFePO4 batteries, low-voltage and high-voltage systems, battery distribution units and components required to build a complete energy storage system.

Our Dyness range is intended for solar installers, EPC contractors and renewable energy businesses across Europe. Check current product availability, B2B net prices and technical documentation. If you need support with system configuration, contact the Clarvento team.

Dyness energy storage system manufacturer

Dyness manufactures battery energy storage systems for homes, businesses, industrial facilities and large-scale energy projects. The company develops modular solutions based on lithium iron phosphate batteries, intelligent battery management systems and cloud-based monitoring platforms.

Dyness was founded in 2017 and is headquartered in Suzhou, China. The company has more than 20 international branches, three research and development centres and three major manufacturing facilities. According to Dyness, more than one million units had been shipped by the end of 2025, supported by a global network of over 500 partners.

• Dyness low-voltage energy storage systems,
• high-voltage battery systems,
• LiFePO4 battery modules in different capacities,
• STACK100, Tower and Tower Pro modular systems,
• PowerBrick Plus and Powerbox G2 batteries,
• BDU control units, system bases and accessories,
• residential and commercial energy storage solutions.

Dyness energy storage systems at Clarvento

Dyness energy storage systems allow surplus electricity generated by a photovoltaic installation to be stored for later use. Stored energy can be used after sunset, during periods of higher consumption or when electricity prices are higher.

Dyness offers systems with different voltage architectures and storage capacities. This allows installers to select a solution for a small residential installation, a larger home, a commercial building or an industrial facility. Before ordering, always verify inverter compatibility, the required number of battery modules, the control unit and the permissible operating voltage range.

Dyness PowerBrick Plus 16.07 kWh

Dyness PowerBrick Plus is a low-voltage energy storage battery with 16.07 kWh of nominal energy and 15.27 kWh of usable energy. Its LiFePO4 cells, integrated battery management system and high capacity per unit reduce the number of modules required for many installations.

• 16.07 kWh nominal energy,
• 15.27 kWh usable energy,
• LiFePO4 battery technology,
• 95% depth of discharge,
• maximum charging and discharging power of 10.24 kW,
• integrated battery management system,
• heating function for operation at lower temperatures,
• IP65-rated enclosure.

PowerBrick Plus is suitable for installations where high capacity per module, enclosure protection and flexible system design are important.

Dyness STACK100 modular energy storage system

Dyness STACK100 is a modular high-voltage system designed for energy storage capacities ranging from 15.36 to 76.8 kWh. Each battery module provides 5.12 kWh, allowing the total system capacity to be adjusted to the energy requirements of the property.

The system can be used in larger residential installations, farms, service facilities and commercial buildings. A complete installation requires compatible battery modules and a suitable Dyness STACK100 SBDU100 control unit.

• 5.12 kWh per battery module,
• system capacity from 15.36 to 76.8 kWh,
• LiFePO4 battery chemistry,
• 95% depth of discharge,
• CAN and RS485 communication,
• modular design for flexible capacity selection.

Dyness Tower Pro and Tower S3

Dyness Tower systems are modular high-voltage energy storage solutions. Individual battery modules are installed in a vertical tower, helping to reduce the required floor area and maintain a clean, organised system layout.

Dyness Tower Pro

Tower Pro uses 3.84 kWh LiFePO4 battery modules. Clarvento offers the Dyness Tower Pro HV9640 3.84 kWh battery module and the compatible BDU base unit. Depending on the configuration, a complete Tower Pro system can provide between 7.68 and 23.04 kWh of energy storage capacity.

Dyness Tower S3

Dyness Tower S3 is a scalable high-voltage system. Depending on its configuration and the number of connected towers, the total system capacity can range from 7.1 to 255.72 kWh. Clarvento offers the Dyness Tower S3 SBDU control module with base.

Dyness Powerbox G2

Dyness Powerbox G2 is a low-voltage energy storage battery designed for residential and smaller commercial installations. Its enclosure provides a clean installation, while its low-voltage architecture enables operation with compatible hybrid inverters.

Powerbox G2 can be a good choice for customers who prefer a complete battery unit instead of a tall structure assembled from several smaller modules.

Dyness DL5.0C low-voltage battery module

Dyness DL5.0C is a low-voltage LiFePO4 battery module with 5.12 kWh of nominal energy. It can be used to build an energy storage system with a capacity suited to the property’s consumption profile and the capabilities of a compatible inverter.

Its modular construction simplifies transport, installation and future system expansion. The number of battery modules and their connection method must always comply with the manufacturer’s documentation and the current inverter compatibility list.

Low-voltage or high-voltage Dyness battery?

Dyness low-voltage batteries

Low-voltage systems typically operate at approximately 48 to 51.2 V. This group includes PowerBrick Plus, Powerbox G2 and DL5.0C. They are commonly selected for residential installations and systems requiring flexible capacity expansion.

Dyness high-voltage batteries

High-voltage systems such as STACK100, Tower Pro and Tower S3 consist of several connected battery modules and a dedicated control unit. They can provide higher power and efficiency in installations with greater energy requirements.

The choice of voltage architecture should not be based solely on battery capacity. The inverter model, voltage range, permitted charging current, charging and discharging power and backup power requirements must also be considered.

Dyness inverter compatibility

An energy storage system must be compatible with the selected inverter model and firmware version. Not every inverter works with every Dyness battery series, even when their voltage specifications appear similar.

Before ordering, verify:

• the current Dyness inverter compatibility list,
• low-voltage or high-voltage architecture,
• the minimum and maximum number of modules,
• the required BMS or BDU control unit,
• the inverter firmware version,
• maximum charging and discharging current,
• backup power configuration.

If you are unsure which components form a compatible system, ask Clarvento to verify your Dyness configuration.

How to choose the right Dyness battery capacity

Before selecting an energy storage system, prepare the following information:

• annual electricity consumption,
• daily electricity consumption profile,
• photovoltaic system capacity,
• amount of surplus electricity exported to the grid,
• required backup power,
• loads that must operate during a power outage,
• planned future expansion,
• installation location and environmental conditions.

An undersized battery may not store enough surplus solar energy, while an oversized battery may remain partially charged for long periods. Battery capacity should be selected based on the actual energy consumption profile, not only on the installed photovoltaic capacity.

Why order Dyness products from Clarvento?

• B2B net prices for installers and renewable energy businesses,
• current stock availability information,
• access to popular Dyness product ranges,
• battery modules, BDU control units and system bases,
• support with component compatibility verification,
• technical documentation available on product pages,
• support for individual orders and regular wholesale purchases,
• individual commercial terms for B2B partners.

Dyness energy storage FAQ

What does Dyness manufacture?

Dyness manufactures residential, commercial and industrial energy storage systems, including low-voltage and high-voltage batteries, LiFePO4 modules, battery management systems, BDU control units and cloud-based monitoring solutions.

Which Dyness energy storage system is suitable for a home?

The right system depends on the inverter, electricity consumption, photovoltaic capacity and required storage capacity. Residential options include PowerBrick Plus, Powerbox G2, DL5.0C, Tower Pro and Tower S3.

What is the capacity of Dyness PowerBrick Plus?

PowerBrick Plus provides 16.07 kWh of nominal energy and 15.27 kWh of usable energy. It features an integrated battery management system, a heating function and an IP65-rated enclosure.

What capacity can a Dyness STACK100 system provide?

A STACK100 system can be configured from 15.36 to 76.8 kWh. Each battery module provides 5.12 kWh of energy storage capacity.

Are Dyness batteries compatible with every inverter?

No. Compatibility depends on the battery series, voltage architecture, inverter model and firmware version. Always check the current Dyness inverter compatibility list before ordering.

Where can I buy Dyness batteries at wholesale prices?

Dyness energy storage systems are available from Clarvento. Create a B2B account to start working with us or request a system configuration and quotation.

Explore Dyness energy storage systems

Compare Dyness batteries, control units and system accessories. Create a wholesale account or ask us to configure a complete Dyness energy storage system.