KENO MAX steel triangle, 15 degree tilt angle

🔩 CHARACTERISTICS AND APPLICATION The KENO MAX mounting system is designed for flat roofs with a pitch of up to 5 degrees, covered with bitumen, membrane, or concrete. The triangle can be installed in ballasted, anchored, and welded structures depending on requirements. Please note that the maximum building height for ballasted structures is 15 m. The structure features a zinc-magnesium coating and is compatible with photovoltaic modules (monofacial and bifacial) with a width from 1134 to 1140 mm and a maximum length up to 2465 mm. The elements are delivered flat-packed and take only moments to assemble. * Optional wind deflector installation is available. 📏 KENO MAX TECHNICAL PARAMETERS For a 15-degree angle: • Length of unfolded element: 2806 mm. • Base length after assembly: 1211 mm. • Height after assembly: 384 mm. After assembly, the triangles are secured using M6x90 Allen screws (K-18-90-M6) with a tightening torque of 7-8 Nm. Two 130 x 80 mm EPDM rubber pads (K-98-10/K-98-11) are glued to the bottom of each triangle. 🛡️WARRANTY Keno sp. z o.o. provides a 10-year warranty on the above structure, with an option to extend for an additional 5 years, as it is manufactured using components with all required certificates.